Toyota Camry 2006 Operating Manual page 275

CAUTION
Never get under the vehicle when
the vehicle is supported by the
jack alone.
'06Camry_U (L/O 0507)
—Changing wheels
7. Remove the wheel nuts and
change tires.
Lift the flat tire straight off and put it
aside.
Roll the spare wheel into position and
align the holes in the wheel with the
bolts. Then lift up the wheel and get
at least the top bolt started through
its hole. Wiggle the tire and press it
back over the other bolts.
Before putting on wheels, remove any
corrosion on the mounting surfaces
with a wire brush or such. Installation
of wheels without good metal- to- met-
al contact at the mounting surface can
cause wheel nuts to loosen and
eventually cause a wheel to come off
while driving.
2006 CAMRY from July '05 Prod. (OM33708U)
275