To Start A Vehicle Remotely; Remote Engine Start - Toyota VIP Owner's Manual

OPERATION
REMOTE ENGINE STARTER
To start a vehicle remotely, press and release the LOCK button twice within two
seconds, then press and hold the LOCK button for three seconds.
STEP 1. Press and release the LOCK button on the remote twice within two seconds.
The hazard lights will flash each time.
A) Press and
release
the LOCK
button.
STEP 2. Press and hold the LOCK button on the remote for three seconds. The hazard
lights flash once when pressed, then again after three seconds. The engine starts,
and the hazard lights flash for 20 seconds.
A) Press and
hold the
LOCK
button for
three
seconds.
NOTE: Any vehicle started with the Remote Engine Starter can idle for a total of 20
minutes. Automatic engine shutdown occurs after 10 minutes, but the vehicle may
be remotely started as many times as the user wishes and run for an additional 10
minutes. After 20 minutes of total operation, however, the vehicle must be started
manually to reset the Remote Engine Starter.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number of
times that the light flashes.
For any questions or concerns about the Remote Engine Starter, please call Toyota
Customer Experience at (800) 331-4331.
TWO SECONDS
B) The hazard
lights flash
once.
UNLOCK
FOLLOWED IMMEDIATELY BY:
THREE SECONDS
B) The hazard
lights flash
once.
UNLOCK
TOYOTA — Remote Engine Starter
C) Press and
release the
LOCK button
again.
UNLOCK
C) After three
seconds,
the hazard
lights flash
again.
D) The hazard
lights flash
again.
20 SECONDS
D) The engine
starts and the
hazard lights
flash for 20
seconds.
Page 5