Positioning; Clicking; Erasing; Dragging - Wacom Intuos CTL-480 User Manual

POSITIONING

To position the screen cursor, move the pen slightly above the active area without touching the screen
surface. Press the pen tip on the screen to make a selection.

CLICKING

Tap the screen once with the pen tip, or touch it to the screen with enough pressure to register a click.
To double click, press the upper side switch (when set to D
the same place with the pen tip.

ERASING

In supported applications the pen eraser works like the eraser on a pencil.
Visit the Wacom website to learn about applications that support the eraser. See
eraser is not supported in an application, you can still use it for positioning, drawing, or annotation.

DRAGGING

Select an object, then slide the pen tip across the screen to move the object.

WORKING WITH PRESSURE SENSITIVITY

The pen responds to the nuance and inflection of your hand movements, enabling you to create natural-
looking pen and brush strokes within applications that support this feature.
To draw, ink, or write with pressure sensitivity, move the pen inside the active area while applying various
amounts of pressure downward on the tip of the pen. Press hard for thick lines or dense color. Press gently
for thin lines or softer color. Some applications require that you first select a pressure-sensitive tool from
the application tool palette. To adjust tip feel, see
Visit the Wacom website to learn about applications that support pressure. See
Contents Contents Index Index
Contents Index
Contents Index
C ), or quickly tap the screen twice in
OUBLE LICK
Adjusting tip feel and
Product information. If the
double-click.
Product information.
15 15
15
15