Table of Contents
Advertisement
ANGLE GRINDERS
STOCK No.63129
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be
kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary information to
ensure its correct and safe use.We recommend that this manual is read before any operation of the machine, before
performing any kind of adjustment to the machine, and prior to any maintenance tasks. By following all the general
safety instructions contained in this manual, it will ensure both machine and operator safety, together with longer life of
the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool policy of
continuous improvement determines the right to make modifications without prior warning.
63130
• INSTRUCTIONS •
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
PART No. PT5115
PT8115
08/2000
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Draper ANGLE GRINDERS
Summary of Contents for Draper ANGLE GRINDERS
-
Page 1: General Information
08/2000 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of the machine, before... -
Page 2: Table Of Contents
Operation and Use..................6, 7 Maintenance and Replacement ................8 Optional Accessories ..................9 DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock Nos:- 63129 & 63130. Part No:- PT5115 & PT8115. -
Page 3: Specification
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you produce a dated receipt or invoice to verify your proof of purchase within the 12 month period. -
Page 4: Power Supply
(i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted. -
Page 5: General Safety
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. -
Page 6: Getting To Know Your Angle Grinder
GETTING TO KNOW YOUR ANGLE GRINDER ✖✌ ✗✌ ✕✌ ✜✌ ✙✌ ✢✌ ✘✌ ✛✌ ✚✌ 1. Rating plate 5. Spindle lock button 8. BS moulded plug & cable 2. On/off switch 6. Disc (sold separately) 9. Disc change wrench 3. Hand grip 7. -
Page 7: Operation And Use
OPERATION & USE IMPORTANT – Make sure that the mains voltage matches Fig.2 the voltage stated on the machines rating plate. ✴✌ FITTING THE GUARD Before fitting the disc to the machine, the protective guard must be fitted and adapted to working requirements. ✮✌... -
Page 8: Operation And Use
OPERATION AND USE SWITCH Fig.4. To turn the machine on, press the switch ✴✌ forward until it locks on. (Fig.4). To release the lock, push the back half of the switch down, ✴✌ until it springs backwards, switching off the grinder. ROUGHING When performing roughing operations, it is advised to maintain the disc tilted at an angle of approximately 30°... -
Page 9: Maintenance And Replacement
MAINTENANCE & PART REPLACEMENT Regular inspection and cleaning reduces the IMPORTANT: necessity for maintenance operations and will keep All operations should be performed by an authorized your tool in good working condition. The tool person. bearings and gears are life-long lubricated. The motor must be correctly ventilated during tool operation. -
Page 10: Optional Accessories
Sintered Wet/dry DB5001 55329 115mm Laser Mortar Rake DB8001 55317 115mm Laser General purpose DB8401 55320 115mm Laser Premium Abrasive DB8404 55322 115mm Laser Premium Hard FOR FURTHER INFORMATION ON ALL ACCESSORIES PLEASE SEE YOUR DRAPER CATALOGUE - 9 -... - Page 11 NOTES - 10 -...
- Page 12 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the ANGLE GRINDERS and is the answer not in the manual?
Questions and answers