Advertisement
Quick Links
ANGLE GRINDERS
STOCK No.57839
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be
kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary information to
ensure its correct and safe use.We recommend that this manual is read before any operation of the machine, before
performing any kind of adjustment to the machine, and prior to any maintenance tasks. By following all the general
safety instructions contained in this manual, it will ensure both machine and operator safety, together with longer life of
the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool policy of
continuous improvement determines the right to make modifications without prior warning.
110V
57840
240V
• INSTRUCTIONS •
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
PART No.AG2230
08/99
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Draper AG2230
Summary of Contents for Draper AG2230
- Page 1 08/99 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of the machine, before...
-
Page 2: Table Of Contents
Operation and use ..................6, 7 Maintenance/parts replacement ..............8 Optional Accessories ..................9 DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock Nos:- 57839 & 57840. Part No:- AG2230. -
Page 3: Specification/Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you produce a dated receipt or invoice to verify your proof of purchase within the 12 month period. -
Page 4: Power Supply
(i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted. -
Page 5: General Safety Instructions
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. -
Page 6: Know Your Angle Grinder
GETTING TO KNOW YOUR ANGLE GRINDER ✢✌ ✖✌ ✚✌ ✘✌ ✗✌ ✕✌ ✙✌ ✜✌ ✛✌ 1.Draper Logo 4.Hand Grip 7.Disc (sold separately) 2.Rating Plate 5.Forward Hand Grip 8.Guard 3.Switch Lever 6.Spindle Lock Button 9.Power Lead - 5 -... - Page 7 OPERATION & USE IMPORTANT – Check before plugging in that the mains Fig.2 ✴✌ voltage agrees with the voltage specified on the rating plate of the machine. ✮✌ FITTING THE GUARD Before fitting the disc to the machine, the protective guard must be fitted and adapted to working requirements.
-
Page 8: Operation And Use
OPERATION AND USE (Cont’d.) SWITCH Fig.4. The switch fitted to the grinder prevents accidental machine starting. However, a locking position has also been provided: SWITCH OPERATING INSTRUCTIONS: Lock “OFF” The switch is protected against accidental start ups by an interlocking button ✪✌ (Fig.4) (lock off) which only allows the machine to operate under special conditions. -
Page 9: Maintenance/Parts Replacement
For correct tool operation always change the brushes grease. The motor must be correctly ventilated during in pairs, not separately. The use of original Draper tool operation. For this reason avoid blocking the air spare parts is recommended. After having fitted new inlets with hands. -
Page 10: Optional Accessories
Sintered (Turbo rim) Gen. purpose – smooth cut DB8004 55319 230ø Laser General purpose DB8404 55322 230ø Laser Premium Abrasive DB9104 55326 230ø Laser Premium Hard FOR FURTHER INFORMATION ON ALL ACCESSORIES PLEASE SEE YOUR DRAPER CATALOGUE - 9 -... - Page 11 NOTES - 10 -...
- Page 12 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the AG2230 and is the answer not in the manual?
Questions and answers