Draper Storm Force 56457 User Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Grinder
  5. Storm Force 56457
  6. User manual

Draper Storm Force 56457 User Manual

230v 650w
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
230V 650W
ANGLE
GRINDER
56457
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Storm Force 56457 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Draper Storm Force 56457

Summary of Contents for Draper Storm Force 56457

  • Page 1 All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

  • Page 2: Title Page 1.1 Introduction

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.

  • Page 3: Table Of Contents

    CONTENTS TITLE PAGE 1.1 INTRODUCTION......................2 1.2 REVISION HISTORY ....................2 1.3 UNDERSTANDING THIS MANUAL ................2 1.4 COPYRIGHT NOTICE ....................2 CONTENTS 2.1 CONTENTS........................3 WARRANTY 3.1 WARRANTY......................... 4 INTRODUCTION 4.1 SCOPE......................... 5 4.2 SPECIFICATION ......................5 4.3 HANDLING AND STORAGE ..................5 HEALTH AND SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE ......6-7 5.2 SPECIFIC SAFETY INSTRUCTIONS FOR GRINDER USE ........7-8...

  • Page 4: Warranty

    This warranty applies in lieu of any other warranty expressed or implied and variations of its terms are not authorised. Your Draper warranty is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the warranty period.

  • Page 5: Introduction

    INTRODUCTION 4.1 SCOPE This angle grinder uses abrasive disks to grind metals or masonry. It is intended for domestic and infrequent light trade use only. Any other application is considered misuse. 4.2 SPECIFICATION Stock no..........................56457 Part no........................AG650_115SF Rated voltage ........................

  • Page 6: Health And Safety Information

    HEALTH AND SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE When using any type of power tool there are steps that should be taken to make sure that you, as the user, remain safe. Common sense and a respect for the tool will help reduce the risk of injury. Read the instruction manual fully.

  • Page 7: Specific Safety Instructions For Grinder Use

    HEALTH AND SAFETY INFORMATION Remove and check setting tools. Some machinery requires the use of additional tools or keys to set, load or adjust the power tool. Before starting the power tool always check to make certain they have been removed and are safely away from the machine. Prevent unintentional starting.

  • Page 8: Safety Recommendations For The Correct Use Of Abrasive Products

    HEALTH AND SAFETY INFORMATION Warning! Prior to mounting an abrasive wheel ensure the expiry date has not exceeded rendering it potentially hazardous. Secure work. Use clamps or a vice to hold the work. It is safer than using your hands and it frees both hands to operate the tool.

  • Page 9: Safety Recommendations For The Correct Use Of Superabrasives

    HEALTH AND SAFETY INFORMATION Further information. The following instructions must be observed, supplementary to the information contained in the instruction for use of the grinding machine: – Observance of the user’s information from the grinding machine manufacturer. – Safety devices shall be mounting to the machine and shall be secured. –...

  • Page 10: Residual Risk

    HEALTH AND SAFETY INFORMATION – Before placing the hand-held grinding machine on the workbench or on the floor it shall be turned off and it shall be ensured that the abrasive product has stopped. 5.5 RESIDUAL RISK Important note: Although the safety instructions and operating manuals for our tools contain extensive instructions for safe working with power tools, every power tool involves a certain residual risk which can not be completely excluded by safety mechanisms.

  • Page 11: Technical Description

    TECHNICAL DESCRIPTION 6.1 IDENTIFICATION NB: Guard supplied is for grinding only. (1) On/Off switch. (2) Rear hand grip. (3) Spindle lock button. (4) Locking flange. (5) Auxiliary handle. (6) Safety guard. (7) Pin spanner. (8) 1 Pair replacement carbon brushes. - 11 -...

  • Page 12: Unpacking And Checking

    Lay the contents out and check them against the parts shown below. If any part is damaged or missing, please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the product.

  • Page 13: Fitting The Auxiliary Handle

    PREPARING THE ANGLE GRINDER 8.1 FITTING THE AUXILIARY HANDLE – FIG.1 For reasons of safety, when working with this type of electric power tool, the operator must always use the auxiliary handle (5). – Screw the handle clockwise, into one of the two threaded apertures best suited to the application and user comfort.

  • Page 14: Fitting/Replacing Accessories (Sold Separately)

    PREPARING THE ANGLE GRINDER 8.3 FITTING/REPLACING Grinder Spindle (M14) ACCESSORIES (sold separately) – FIGS. 3 – 5 Warning! Prior to mounting an abrasive wheel ensure the expiry date has not expired, rendering it potentially hazardous. Warning! Selection of the correct accessory, suitable for the intended application is vital.
  • Page 15 PREPARING THE ANGLE GRINDER – Press and hold the spindle lock button (3). – Loosen the locking flange (4) anti-clockwise using the pin spanner (7) supplied. – The spindle may rotate slightly before the spindle lock fully engages. – Remove the locking flange only. –...

  • Page 16: Basic Angle Grinder Operations

    “cutting” guard fitted to this grinder. which if continued will damage the motor. Ensure that the diameter of the wheel is – Please contact Draper Tools for further within 25% of its original size. information on how to purchase this optional accessory.

  • Page 17: Maintenance And Troubleshooting

    10. MAINTENANCE AND TROUBLESHOOTING 10.1 MAINTENANCE Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your tool in good working condition. The motor must be correctly ventilated during tool operation. Avoid blocking the air inlets and vacuum the ventilation slots regularly.

  • Page 18: Disposal

    11. DISPOSAL 11.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: ●...

  • Page 19: Explanation Of Symbols

    12. EXPLANATION OF SYMBOLS 12.1 EXPLANATION OF SYMBOLS Class II construction Read the instruction manual. (Double insulated). WEEE – Waste Electrical & Wear face mask and safety Electronic Equipment. glasses. Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish.
  • Page 20 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

Table of Contents