Outer Rails; Installing The Outer Rails - Supero CSE-PT52L User Manual

Rack Installation for Supermicro Switches
Secure to the
Front of the Rack
2-3

Outer Rails

Installing the Outer Rails

Installing the Outer Rails on the Rack
1. Attach the shorter outer rail to the outside of the longer outer rail. You must
align the pins with the slides. Also, both bracket ends must face the same
direction.
2. Adjust both the shorter and longer brackets to the proper length so that the
rail fits snugly into the rack.
3. Secure the long bracket to the front side of the rack with two M5 screws and
the short bracket to the rear side of the rack with three M5 screws.
4. Repeat steps 1-4 for the remaining outer rail.
Attach Outer Racks
together
Figure 2-3: Assembling the Outer Rails
2-4
Secure to the
Rear of the Rack