Appendices; Appendix A: Quick Reference Guide - Avocent SwitchView 1000 Installer/User Manual

APPENDICES

Appendices

Appendix A: Quick Reference Guide

Table A.1: SwitchView1000 Quick Reference Guide
Command Hotkeys
Select ScrLk + ScrLk + (a)
Server + (b) + (y) + (z) ab =
bank no.
xy = channel no.)
Next Lower ScrLk + ScrLk +
Channel (arrow up)
Next Higher ScrLk + ScrLk +
Channel (arrow down)
Next Lower ScrLk + ScrLk +
Bank PgUp
Next Higher ScrLk + ScrLk +
Bank PgDn
Autoscan ScrLk+ScrLk + B
Beep Sound
On/Off
Load Factory N/A
Default
Change N/A
Server
Name
Reset / ScrLk + ScrLk +
Initialize End
OSD Control Front-panel
Cursor keys to Press
navigate corresponding
Enter to select button yz on
Switch ab for
channel yz on
bank ab
Cursor keys to Press
navigate corresponding
Enter to select button
Enter to select Press
corresponding
button
PgUp (w/ OSD Press
Menu) corresponding
button
PgDn (w/ OSD Press
Menu) corresponding
button
N/A N/A
Main Menu / N/A
Setup / Load
Default
Enter (Ins) to N/A
select/edit
N/A N/A
Description
Select the active bank
(switch) and channel
Select the next lower
connected channel
Select the next higher
connected channel
Select the next lower bank
(switch) with multiple daisy-
chained units
Select the next higher bank
(switch) with multiple daisy-
chained units
Toggle on/off the beep
sound for switching
confirmation while
autoscanning. The beep
sound can be turned off
during normal switching
Restore the EEPROM
settings to the factory
default
Change the server name
[max. length = 8
alphanumeric characters]
Reset the switch/initialize
the daisy-chain setup
9