Linksys FENSK05 User Manual page 44

NetWare
5. At the server command line, type:
LOAD c:\LNE100\NBI31X.NLM
LOAD c:\LNE100\MSM31X.NLM
LOAD c:\LNE100\ETHERTSM.NLM
LOAD c:\LNE100\LNE100TX.LAN
6. Bind a protocol to the driver. For example:
BIND IPX TO LNE100TX NET=XX
where XX is the logical network address for the frame
type in your LOAD command.
The load and binding are complete. The server is ready
to be used.
42