Windows Nt 4.0 Setup - Linksys FENSK05 User Manual

Windows NT

Windows NT 4.0 Setup

The instructions that follow explain how to set up an
NT 4.0 server/workstation.
You should have your original Windows NT CD-ROM
handy during the installation, as you might be asked to
supply it. Always contact your network administrator or
consult your NT documentation if you have questions.
To install the network driver for an NT 4.0 Server or
Workstation:
1. Start up your computer and Windows NT 4.0. Enter
your username and password if asked to do so.
2. Click on Start, Settings, Control Panel, and then
double-click on the Network icon.
3. If you have not installed Windows NT networking on
your computer before, a message appears that reads:
Windows NT Networking is not installed. Do you want
to install it now?
• If you see this message, click on Yes to install NT net-
working along with the EtherFast Card's network driver,
and continue with step 1 on the next page.
• If you don't see this message, NT networking is
already installed. Continue with step 1 on page 30.
Installing NT Networking and the EtherFast Network
Driver
26