Table of Contents
Advertisement
NetWare
8. Click on the Other Locations or Specify Location
button when it appears. Put the EtherFast card disk into
drive A. Type a:\client32 and press Enter. Windows 95
will locate the client driver. Click on the Finish button.
If you receive a Msgsrv32 error message, don't worry --
just click on the Ignore button. Some versions of the
Client32 Novell software have a bug. Ignore it and pro-
ceed.
9. When the installation is complete, restart your com-
puter.
10. After rebooting your PC, click on Start, Settings,
Control Panel, and double-click on the Network icon.
Double-click on Novell NetWare Client32 and make
any setting changes as necessary. When you're finished,
save them and reboot.
The Client32 drivers have been installed. You should
now be able to access your Novell NetWare network
through the Network Neighborhood icon.
If you would also like to enable Windows 95 or 98
built-in networking in order to share files, drives, and
printers between computers, follow all of the directions
in the File and Printer Sharing for Windows 95 or 98
section of this user guide.
40
Advertisement
Table of Contents
