Programming The Hob; Switching The Hob On And Off; Adjusting The Hotplate; Cooking Guidelines - Bosch PIF6..T1 Series Instruction Manual

Table of Contents

Advertisement

Programming the hob

This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.

Switching the hob on and off

The hob is turned on and off using the main switch.
To turn on: press the
%
symbol. The indicator above the main
switch lights up. The hob is ready for use.
To turn off: press the
symbol until the indicator above the
%
main switch disappears. All hotplates are turned off. The
residual heat indicator stays lit until the hotplates have cooled
off.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.

Adjusting the hotplate

Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.

Cooking guidelines

The table below contains some examples.
The cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Power levels influence the cooking results.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
Heating and warming
Stew (e.g., lentils)
Milk**
Sausages heated in water**
Defrosting and heating
Frozen spinach
Frozen goulash
Slow cooking, simmering
Potato pancakes
Fish
White sauces (e.g., bechamel)
Whipped sauces (e.g., Bearnaise, Hollandaise)
* Continue cooking without a lid
** Uncovered
6
To select the power level:
The hob must be switched on.
Press the + or - symbol of the required hotplate and its
1.
display lights up
.
In the following 10 seconds, press the + or - symbol. The
2.
default settings appear.
+ symbol = power level 9.
- symbol = power level 4.

To change the power level, press the + or - symbol until the
3.
required power level appears.
Turning off the hotplate
Press the + or - symbol until
and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
Remove purées, creams and thick sauces from time to time, if
they get too hot.
Use power level 9 to begin cooking.
Ongoing cooking
setting
1-1.
1-1.
1-2
1.-2.
3-4
2­-3
2­-3
4­-5*
4 -5*
1-2
3-4

appears. The hotplate turns off
Ongoing cooking time
in minutes
-
-
-
-
-
5-15 min
20-30 min
20-30 min
10-15 min
3-6 min
8-12 min

Advertisement

Table of Contents
loading

Table of Contents