Table of Contents
Advertisement
The hotplates
Hotplate
Single hotplate
$
Grill plate
æ
Resistive plate-warming plate*
q
* Turning on the hotplate: The corresponding indicator lights up.
Once this has been activated, you do not need to have any other hotplate switched on.
** The residual heat warning light comes on.
Only use pans suitable for induction cooking, see the "Appropriate cookware" section.
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Switching the hob on and off
The hob is turned on and off using the controls.
When the hob is switched on, the power level display lights up.
Set the hotplate
Use the controls to set the desired power level.
0 = hotplate switched off.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Selecting the power level
Turn the control to the right until reaching the desired powered
level.
Cooking guidelines
The table below contains some examples.
The cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Power levels influence the cooking results.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
Heating and warming
Stew (e.g., lentils)
Milk**
Sausages heated in water**
* Continue cooking without a lid
** Uncovered
6
Turning on and off
Use a correctly sized pan.
The hotplate turns on automatically when a pan the same size as its outer
edges is placed on it.
To turn on: switch on a hotplate. Press the
Then press the
Û
symbol.
To turn off: press the
Û
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
The selected power level lights up on the indicator.
Switch off the hotplate
Turn the control to the left until reaching level 0. The hotplate
turns off and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
Remove purées, creams and thick sauces from time to time, if
they get too hot.
Use power level 9 to begin cooking.
H
symbol, the
symbol.**
œ
/
•
light will remain on as long as
Ongoing cooking
setting
1-1.
1-1.
1-2
1.-2.
3-4
H
indicator lights up.
/
œ
•
Ongoing cooking time
in minutes
-
-
-
-
-
Advertisement
Table of Contents
