Table of Contents
Advertisement
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Switching the hob on and off
The hob is turned on and off using the main switch.
To turn on: press the
symbol. The indicator above the main
%
switch lights up. The hob is ready for use.
To turn off: press the
symbol until the indicator above the
%
main switch disappears. All hotplates are turned off. The
residual heat indicator stays lit until the hotplates have cooled
off.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.
Set the hotplate
Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Cooking guidelines table
The table below contains some examples.
Cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Power levels affect cooking results.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
Heating and keeping warm
Stew (e.g., lentils)
Milk**
Sausages heated in water**
Defrosting and heating
Frozen spinach
Frozen goulash
* Uncovered cooking
** Uncovered
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
To select the power level:
The hob must be switched on.
Press the + or - symbol of the required hotplate and its
1.
display lights up
.
‹
In the following 10 seconds, press the + or - symbol. The
2.
default settings appear.
+ symbol = power level 9.
- symbol = power level 4.
To change the power level, press the + or - symbol until the
3.
required power level appears.
Turning off the hotplate
Press the + or - symbol until
and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
When heating purées, creams and thick sauces, stir
occasionally.
Use power level 9 to begin cooking.
Power level
1-1.
1-1.
1-2
1.-2.
3-4
2.-3.
2.-3.
œ
/
•
light will remain on as long as
‹
appears. The hotplate turns off
Cooking time
(minutes)
-
-
-
-
-
5-15 min
20-30 min
/
œ
•
7
Advertisement
Table of Contents
