Table of Contents
Advertisement
The Powerboost Function
The Powerboost function can be used to heat food more
quickly than using the power level
Limitations on use
Induction hotplates (1 and 4) include this function, see
diagram. The Powerboost function is available provided that the
other induction hotplate is not turned on. If this is not the case,
the
›
and
Š
symbols will flash on the selected hotplate display;
then the power level will be automatically set to
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
To switch a cooking zone off automatically
Enter the cooking time for the required hotplate. It will turn off
automatically when the time has lapsed.
Programming
Select the required power level.
1.
Press the
symbol. The
0
2.
up.
‹‹
appears in the time program function display. To
select a hotplate, press the
indicator for the required hotplate lights up.
x
Press the + or - symbol of the time program function. The
3.
basic setting appears:
+ symbol: 30 minutes.
- symbol: 10 minutes.
Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the timer will start to count down.
Once the time has elapsed
The hotplate switches off. The warning signal sounds, and the
in the time program function visual display
seconds. The
x
indicator lights up on the hotplate display.
Pressing the
0
symbol turns off the indicators and stops the
beep.
8
Š
.
Š
.
indicator of the hotplate lights
x
symbol several times until the
0
‹‹
appears for 10
To activate
Select the power level
Š
1.
Press the + symbol. On the hotplate, the
2.
appear. You have now activated the function
To switch off the hotplate
Press the - symbol. The
›
the hotplate returns to power level
has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Changing or cancelling the time
Press the
symbol several times until the required
0
indicator lights up. Change the cooking time using the + or -
symbols, or set to
.
‹‹
Notes
If a cooking time has been programmed in several zones, it
■
can be set to display all time values. To do this, press the
symbol several times until the
hotplate lights up.
Cooking times of up to 99 minutes can be programmed.
■
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a zone may be cancelled or
changed:
Press the
symbol several times until the required
0
indicator lights up. Change the cooking time using the + or -
symbols, or set to
.
‹‹
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the
symbol several times until the
0
1.
up.
‹‹
appears in the time program function display.
Press the + or - symbol on the time program function. The
2.
basic setting will appear.
+ symbol: 10 minutes.
- symbol: 05 minutes.
Set the time required using the + or - symbols.
3.
After a few seconds, the timer will start to count down.
.
indicator will
›
indicator is no longer displayed and
. The Powerboost function
Š
indicator for the required
x
indicator lights
W
x
0
x
Advertisement
Table of Contents
