Download Table of Contents Print this page

Black & Decker KC2000 User Instructions


New Zealand
Table of Contents

Summary of Contents for Black & Decker KC2000

  • Page 1 Ireland Australia New Zealand...
  • Page 4: Intended Use

    Intended use Remove adjusting keys and wrenches Your Black & Decker multi-purpose tool has been designed for Always check that adjusting keys and wrenches are removed a wide range of DIY applications. from the tool before operating the tool. Using the drill/screwdriver head, this tool is intended for Use appropriate tool screwdriving applications and for drilling in wood, metal, The intended use is described in this instruction manual.
  • Page 5: Electrical Safety

    Do not store in locations where the temperature may Always switch the tool off and wait for the saw blade to exceed 40 C. come to a complete standstill before putting the tool down. Charge only at ambient temperatures between 4 C and Keep your hands well clear of the saw blade while working.
  • Page 6 To remove the saw blade, lift the lever (18) and pull the Fitting and removing the battery (fig. B) saw blade from the holder. KC2000 Fitting and removing sanding sheets (fig. F & I) To fit the battery (5), line it up with the receptacle on the The sanding head uses pre-cut sanding sheets.
  • Page 7 Warning! Never use the sanding head without a sanding Selecting the torque or drill position (fig. E) sheet or accessory in place. This tool is fitted with a collar to set the torque for tightening screws. Replacing the diamond sanding tip (fig. F & J) u For drilling, set the collar (7) to the drilling position by Sanding sheets are supplied with two replacement diamond aligning the symbol...
  • Page 8 Sanding (fig. A) Lower the rear of the shoe towards the workpiece, Select forward rotation by moving the forward/reverse maintaining a firm pivoting pressure on the saw shoe. slider (2) to the left. With the shoe flat on the workpiece, feed the blade into To switch the tool on, press the variable speed switch (1).
  • Page 9: Ec Declaration Of Conformity

    The product has been used for trade, professional or hire at: purposes; The product has been subjected to misuse or neglect; Technical data The product has sustained damage through foreign KC2000 KC2002 objects, substances or accidents; Voltage 14.4 Repairs have been attempted by persons other than Battery cat.
  • Page 10 TYP. KC2000 E12966.FH5 27/04/00 CW...
  • Page 12 ???????

This manual is also suitable for:


Table of Contents