Using A Multi-Handset System; To Make An Intercom Call; To End An Intercom Call - Binatone SYMPHONY 2610 System User Manual

Using a multi-handset system

If you have an Symphony
you already have up to six handsets registered to your
base unit. You can register additional handsets —
altogether, up to six handsets per base unit. With
two or more handsets registered, you can:
make intercom calls from one handset to another
transfer an outside call from one handset to another
shuttle between an outside call and an intercom call
set up a three-way conference call
Each handset's number (
Only one handset can be connected to the outside
!
line at once. If you try to make a call while another
handset is already using the line, you'll hear rapid
'beeps' and the display will show
To make an 1 Press and hold the INT button for 2 seconds
intercom call
u The display shows a list of handset numbers
in this example,
2
Key in a handset number and press the left
handset 1 is
Soft button Select
calling handset 2)
u The display shows
Handset 2 rings with
Handset 1 Calling
shows
Press the left Soft button
3
the call
To end an Press the HANG UP button;
intercom call or simply replace the handset on the
base unit or charger pod
Binatone Help Line: 0845 345 9677
2610 multi-handset system,
1
to 6) is shown on its display.
Base busy
.
Call to Handset 2 .
melody and its display
to answer
Accept
25
(Local Call rate)