Using A Multi-Handset System; To Make An Intercom Call; To Answer An Intercom Call - Binatone E3300 Manual

Using a multi-handset system

If you have an e3300 Twin or Triple system, you already
have two or three handsets registered to your base unit.
You can register additional handsets — up to six
handsets per base unit. With two or more handsets
registered, you can:
I
make intercom calls from one handset to another
I
transfer an outside call from one handset to another
I
shuttle between an outside call and an intercom call
I
set up a three-way conference call
Each handset's number (h1 to h6) is shown on its
display.
Only one handset can be connected to the outside
!
line at once. If you try to make a call while another
handset is already on the line, you'll hear Busy tone.
Some of the instructions in this section tell you to
!
press a button 'for one second'. This means that you
should press the button and hold it down for a
moment until the display changes, you hear a tone,
or you are connected to another call.
To make an 1 Press the INT (
intercom call
INT
appears on your handset's display, with the
numbers of all other registered handsets.
2
Key in a handset number; or press 9 to call
all other registered handsets
The other handset rings, and the
flashes on its display. When the other handset
user answers, you will be connected.
16
✱
) button for one second
INT
symbol
To answer an The ringing tune for intercom calls is different from that
intercom call for outside calls. When someone makes an intercom call
to you (even when you're already busy on a call)
appears on your handset's display, with the number of
the handset calling you.
◗
Press any button (except HANG UP/C) to answer
the call
◗
To end Press the HANG UP/C button
◗
an intercom
Or simply replace the handset on the base
call
unit or charger pod
To transfer a When you have made or answered an outside
call call, to transfer it to another handset:
1 Press the INT (
then key in the number of the other handset
The outside call is put on hold and the other
handset rings. When the other handset user
answers, you can speak to her/him.
If the other user does not answer, you can get
back to the outside call at any time by pressing
and holding the INT (
2
Press the HANG UP/C button to hang up
and transfer the call
You can press the HANG UP/C to transfer the
outside call before the other handset answers
your intercom call. If the user hasn't answered
after 30 seconds, the outside call will come
back to you and your handset will ring.
Binatone Help Line: 01325 304 473
Using a multi-handset system
INT
✱
) button for one second
✱
) button again.
17