Chapter 4: Diagnostics; Beep Codes; Flash Utility - TYAN Thunder i7505 Manual

Chapter 4: Diagnostics

Note: if you experience problems with setting up your system, always check the following things in
the following order:
By checking these items, you will most likely find out what the problem migh t have been when
setting up your system. For more information on troubleshooting, check the Tyan website at:
http://www.tyan.com .

4.1 Beep Codes

Fatal errors which halt the boot process are communicated through a seri es of audible beeps.
(1) Memory module initialization failed
(a) memory modules might not be plugged in pairs
(b) wrong type of memory
(c) bad memory modules
(2) Graphics initialization failed
Before contacting your vendor or Tyan Technical Support, be sure that you no te as much as you
can about the beep code length and order that you experience. Also, be ready with information
regarding add-in cards, drives and O/S to speed the support process and come to a quicker
solution.

4.2 Flash Utility

Every BIOS file is uniqu e for the motherboard it was designed for. For Flash Utilities, BIOS
downloads, and information on how to properly use the Flash Utility with your motherboard, please
check the Tyan web site: http://www.tyan.com
Please be aware that by flashing your BIOS, you agree that in the event of a BIOS
flash failure, you must contact your dealer for a replacement BIOS. There are no
NOTE
exceptions. Tyan does not have a policy for replacing BIOS chips directly with end
users. In no event will Tyan be held responsible for damages done by the end user.
CPU, Memory, Video
34
http://www.TYAN.com