TYAN Thunder i7505 Manual page 30

3.4.6 – Integrated SCSI / Network / USB / Audio /1394 Controller Sub -Menu
Feature
Integrated PCI Device
Option ROM Scan
Latency Timer
3.4.7 – AGP Slot Sub-Menu
Feature
Latency Timer
Graphic Aperture
3.4.8 – PCI Device Slot - n Sub-Menu
Feature
Option ROM Scan
Latency Timer
Option
Enabled This setting determines whether the
Disabled
integrated PCI device is activated.
Enabled This setting determines whether the
Disabled
option ROM of the integrated PCI
device is loaded during system BIOS
POST.
Default This setting controls how long each
0020h
PCI device can hold the bus before
0040h
another PCI device takes over. When
0060h
set to higher values, every PCI device
0080h
can conduct transactions for a longer
00A0h
time and thus improve the effective
00C0h
PCI bandwidth.
00E0h
Option
Default This setti ng controls how long each
0020h
PCI device can hold the bus before
?
another PCI device takes over. When
00E0h
set to higher values, every PCI device
can conduct transactions for a longer
time and thus improve the effective
PCI bandwidth.
256Mb This setting controls system RAM
128Mb
allocation. The aperture is a portion of
64Mb
the memory address range dedicated
32Mb
to graphics memory address space.
Host cycles that hit the aperture range
are forwarded to the AGP without any
translation.
Option
Enabled This setting determines whether the
Disabled
option ROM of the PCI slot is loaded
during system BIOS POST.
Default This setting controls how long each
0020h
PCI device can hold the bus before
?
another PCI device takes over.
00E0h
30
http://www.TYAN.com
Description
Description
Description