TYAN Thunder i7505 Manual page 11

2.6 – PS/2 ACPI Jumper (J12)
2.7 – Rear Panel USB ACPI Jumper (J14)
2.8 – Disable Slot-A PCI-X Capability Jumper (J30)
CLOSE Pins 1 and 2 (Default)
To disable PS/2 devices' ACPI wake up function
CLOSE Pins 2 and 3
To enable PS/2 devices' ACPI wake up function
CLOSE Pins 1 and 2 (Default)
To disable rear panel USB devices' ACPI
S3/S4/S5 wake up function
CLOSE Pins 2 and 3
To enable rear panel USB devices' ACPI
S3/S4/S5 wake up function
Total current of all USB devices should not exceed the
standby current rating of the power supply
OPEN (Default)
To enable PCI - X capabi lity on Slot-A
CLOSE
To disable PCI-X capability on Slot- A
11
http://www.TYAN.com
pin-3
pin-3
pin-3
pin-3