As (Announcement Support) Icon Status (Ex: Traffic Icon); Advanced Dab Tuner Operation; Switching The Dab Display; Storing And Recalling Broadcast Frequencies - Pioneer AVIC-X1 Operation Manual

(5) AS (Announcement support) icon
➲ "AS (Announcement support) icon status" ➞
Page 79
(6) TEXT indicator
Shows that the currently received service has a
dynamic label.
(7) Preset list display
Shows the preset list.
(8) EXTRA indicator
Shows that the currently received service has a
secondary service component.
(9) NET indicator
Shows when service follow function is on (flash-
ing).
This indicator lights when the service or FM
broadcast is located.
(10) DAB indicator
Shows when DAB reception is possible.
AS (Announcement support)
icon status (ex: Traffic icon)
(White characters): Information interrup-
tion is ON, but you will not receive data since
there is none
(Icon only): Even if the information interrup-
tion is turned OFF, data is still received. (You can
receive when information interruption is turned
ON.)
(Blue characters): The information
interruption is turned ON, and currently receiv-
ing data.
(No display): Information interruption is turned
OFF, and no data is being received.
1
Touch the source icon and then touch
"DAB" to select the DAB.
2
Touch the screen to display the touch
panel keys.
3
Touch "BAND" to select a band.
Touch "BAND" repeatedly until the desired
band is displayed, DAB1, DAB2 or DAB3.
4
To select a service, touch
You can also select a service by moving the
joystick left or right.
5
To select an ensemble, keep touching
or
You can cancel ensemble search by touching
either
You can also perform ensemble search by
holding the joystick left or right.

Advanced DAB tuner operation

(1) Function display
Shows the function names.
➲ How to display the FUNCTION menu ➞
Page 59

Switching the DAB display

➲ Switching screen display ➞ Page 96
Storing and recalling broadcast
frequencies
1
When you find a service that you want to
store in memory keep touching a preset
tuning key P1 — P6 until the preset
number (e.g., P.ch: 1) stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected service has been stored in mem-
ory.
The next time you touch the same preset tun-
ing key P1 — P6 the service is recalled from
memory.
When the touch panel keys are not displayed,
you can display them by touching the screen.
When P1 — P6 are not displayed, you can
display them by touching "DISP".
❒ Up to 18 services, 6 for each of the three
or briefly.
❒ You can also use
for about one second and release.
or briefly.
(1)
bands can be stored in memory.
and
ices assigned to preset tuning keys P1 —
P6.
to recall serv-
79