Pioneer AVIC-X1 Operation Manual page 123

Message
Data Read error. Back to Original
Background.
Please do not turn power off.
There are no files available in /BG/
folder.
Please insert the appropriate disc.
Route calculation was not possible.
•Scaling down.
•Scaling up.
•No map data available on this
scale. Scaling up.
•No map data available on this
scale. Scaling down.
Failure in the memory recovery proc-
ess. Memory navigation is presently
not possible.
The map data could not be stored.
Previous setting will be kept.
Failed to save to memory. Please re-
enter setting.
When
Failed to read the data because the
CD-R is damaged or dirty. Or, the
pick-up lens of the DVD drive is dirty.
If the BG folder exists on the PC card
but no data in JPEG format exists.
If the BG folder exists on the CD-R
but no data in JPEG format exists.
In the memory navi mode, if the
Auto-reroute does not function for
some reason.
In the memory navi mode, if the map
disc is inserted without changing the
scale (only when the point is stored
on the map disc).
When the scale that had been previ-
ously displayed cannot be displayed
for the following reasons:
•The disc was ejected and the sys-
tem was changed to the memory
navi mode.
•In the memory navi mode, the map
was scrolled to outside the memory
area. Or the vehicle moved outside of
the memory area.
Failed to complete the recovery of the
memory area because the disc could
not be read for some reason, result-
ing in deletion of the memory.
In case recovery was performed for
the memory area after failing to read
the disc data for some reason (The
memory area that was previously set
will be recovered).
In case the settings could not be
saved for some reason.
What to do
Try re-reading the data by inserting a
clean CD-R.
Clean the pick-up lens with a com-
mercially available cleaning kit for
DVD, then try to reading again.
Use the appropriate data after read-
ing "Changing Background Picture"
on page 49.
Insert the map disc.
The scale automatically returns to
the one that was set in the DVD navi
mode before being changed to the
memory navi mode.
If the desired scale cannot be
selected, insert the map disc and
then change the scale.
•Clean the disc.
•Clean the DVD drive.
•Consult the Pioneer Local dealer if
this message persists.
•Clean the disc.
•Clean the DVD drive.
•Consult the Pioneer Local dealer if
this message persists.
•Retry.
•Consult the Pioneer Local dealer if
this message persists.
121