Turn Signals/Lane Change Assist; Electronic Vehicle Information Center (Evic) Controls - RAM DODGE 1500 2009 Quick Reference Manual

Mist (push)
turn siGnals/Wipers/Washers/hiGh BeaM lever

TURn SIGnALS/LAne CHAnGe ASSIST

• Tap the lever up or down once and the turn signal (right or left) will flash
three times then automatically turn off.
WIPeRS
Intermittent, High and Low operation
•
Rotate the end of the lever to the first detent position for one of five
intermittent settings, the second detent for low wiper operation and
the third detent for high wiper operation.
Mist
•
Push the end of the lever inward to the first detent for a single wipe to
clear mist.
Washer operation
•
Push the end of the lever inward to the second detent to spray washer
fluid and operate the wipers.
High Beams
•
Push the lever forward to activate the High Beams.
• A High Beam symbol will illuminate in the cluster to indicate the
High Beam lights are on.

electronic vehicle inforMation center (evic) controls

•
The eVIC features a driver interactive display that is located in the
instrument cluster. Pressing the controls on the steering wheel allows
the driver to select vehicle information and Personal Settings.
front Wipers
push lever for
high Beams