Infrared Receiver - American DJ Flat Par QWH12 User Instructions

Lighting equipment

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Flat Par QWH12

4. When "b.XXX" is displayed you are in Blue dimming mode. Press the

UP and DOWN buttons to adjust intensity.

5. When "H.XXX" is displayed you are in White dimming mode. Press

the UP and DOWN buttons to adjust intensity.

6. After you have adjusted the RGBW colors to make your desired color

you can then activate strobing by pressing the SET UP button to

enter the Flash (strobe) mode.

7. "FS.XX" will be displayed, this is Flash mode. The Flash can be

adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).

DMX Mode:

Operating through a DMX controller gives the user the freedom to create

their own programs tailored to their own individual needs. This function

also allows you to use your fixtures as spot lights. The Flat Par QWH12

has 8 DMX modes: 1 Channel mode, 2 Channel mode, 3 Channel mode,

4 Channel mode, 5 Channel mode, 6 Channel mode, 7 Channel mode

and a 8 Channel mode. See pages 15-21 for each modes' DMX traits.

1. This function will allow you to control each individual fixture's traits

with a standard DMX 512 controller.

2. To run your fixture in DMX mode press the MODE button until

"A.XXX" is displayed. "XXX" represents the current displayed ad-

dress. Use the UP or DOWN buttons to select your desired DMX

address, then press the SETUP button to select your DMX Channel

mode.

3. Use the UP or DOWN buttons to scroll through the DMX Channel

modes. The Channel modes are listed below:

To run the 1 Channel Mode, press the MODE button until "Ch.01"

is displayed. This is the 1 Channel DMX Mode.

To run the 2 Channel Mode, press the MODE button until "Ch.02"

is displayed. This is the 2 Channel DMX Mode.

To run the 3 Channel Mode, press the MODE button until "Ch.03"

is displayed. This is the 3 Channel DMX Mode.

To run the 4 Channel Mode, press the MODE button until "Ch.04"

is displayed. This is the 4 Channel DMX Mode.

To run the 5 Channel Mode, press the MODE button until "Ch.05"

is displayed. This is the 5 Channel DMX Mode.

To run the 6 Channel Mode, press the MODE button until "Ch.06"

is displayed. This is the 6 Channel DMX Mode.

To run the 7 Channel Mode, press the MODE button until "Ch.07"

is displayed. This is the 7 Channel DMX Mode.

American DJ

- www.Americandj.com - Flat Par QWH12 User Manual Page 9

Operating Instructions

Flat Par QWH12

To run the 8 Channel Mode, press the MODE button until "Ch.08"

is displayed. This is the 8 Channel DMX Mode.

4. Please see pages 15-21 for DMX values and traits.

5. After you have chosen your desired DMX Channel mode plug in

the fixture via the XLR connections to any standard DMX controller.

Default Running Mode:

This is a default running mode. When this mode is activated all modes

will return to their default settings.

1. Plug the fixture in and press the MODE button until "dXX" is dis-

played. "XX" represents either "on" or "oFF".

2. Press the SET UP button until "dEFA" is displayed.

3. Press the UP and DOWN buttons simultaneously. Press the MODE

button to exit.