Static Color Mode; Infrared Receiver; Led Display On/Off - American DJ LED Pixel 4C User Instructions

LED Pixel 4C
the different modes.
• AJXX = Color Change mode, there are 24 Color Change modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Change modes.
• AFXX = Color Fade mode, there are 24 Color Fade modes to choose
from. Use the UP or DOWN buttons to scroll through the different
Auto Fade modes.
2. After you have chosen your desired Auto Mode press the SET UP
button until "SP.XX" is displayed. When this is displayed you can
adjust the running speed of your Auto Mode. Use the UP or DOWN
button to adjust the speed between "SP.01" (slowest) and "SP.16"
(fastest). Once you have set your desired running speed, press the
SET UP button to return to your desired Auto Mode.

Static Color Mode:

1. Plug the fixture in and press the MODE button until "S-XX" is dis-
played. "XX" represents the current LED Pixel Tube being controlled.
If "S-FU" is displayed then all of the tubes are being controlled. If
"S-01" is displayed, you are controlling the tube connected to port 1.
If "S-02" is displayed, you are controlling the tube connected to port
2. If "S-03" is displayed, your controlling the tube connected to port
3. If "S-04" is displayed, you are controlling the tube connected to
port 4. After deciding what tube to control press the SET UP button.
2. After pressing the SET UP button "CLXX" will be displayed.
3. There are 7 colors to choose from. Use the UP and DOWN buttons
to scroll through the 7 colors. After you have found your desired
color you can activate strobing by pressing the SET UP button to
enter the Flash (strobe) mode.
3. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).

LED Display On/Off:

To set the LED display to turn off after 10 seconds, press the MODE but-
ton until "dXXX" is displayed. "XXX" represents either "on" or "oFF".
Press the UP or DONW buttons so that "doff" is displayed. Now the
display will disappear after 10s. Press any button to turn the display on
again. Be advised though that the display will turn off automatically after
10 seconds.
"don" = LED display on at all times.
"doFF" = LED display shuts off after 10 seconds.
ADJ Products, LLC - www.adj.com - LED Pixel 4C User Manual Page 9
Operating Instructions LED Pixel 4C
LED Display Inversion:
Follow these instructions to flip the display 180° so that the display can
be read upside down.
1. Plug the fixture in and press the MODE button until "dXXX" is dis-
played.
2. Press the SET UP button until "Stnd" is displayed.
3. Press the UP or DOWN buttons to "flip" the display 180°.
Default Running Mode:
This is a default running mode. When this mode is activated all modes
will return to their default settings.
1. Plug the fixture in and press the MODE button until "dXXX" is dis-
played.
2. Press the SET UP button until "dEFA" is displayed.
3. Press the UP and DOWN buttons simultaneously. Press the MODE
button to exit.

Infrared Receiver:

This function is used to activate and deactivate the infrared receiver.
When this function is activated you can control the fixture using the ADJ
LED RC (Remote Control). Please see the next page for ADJ LED RC
controls and functions.
1. Plug the fixture in and press the MODE button until "dXXX" is dis-
played.
2. Press the SET UP button until "IrXX" is displayed. "XX" represents
either "on" or "oF".
3. Press the UP or DOWN buttons to either activate the remote func-
tion (On) or deactivate it (Off).
ADJ Products, LLC - www.adj.com - LED Pixel 4C User Manual Page 10
Operating Instructions