Table of Contents
Advertisement
uSB OpERATION
Connecting external
data media
Before connecting the data medium, switch the
television to standby using »
d evice and then switch the television on again.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
Notes:
»uSB« interface of the television supports
7
500mA current according to the USB
standard.
If you are using a power cable for the
7
external hard disk that you have connected
to the »uSB« interface, then the power
cable of the external hard disk must also be
unplugged when the TV is turned off.
External data media may not be disconnected
7
from the television set while files on the data
medium are being accessed.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment)
d evices in EN 55022/EN 55024 is not
possible.
U SB transfer is not in itself an operating
7
mode. It is only an additional function.
50
ENGLISH
---------------------------------------------------------------------------------------------------------------
8
«. Connect the
1 Connect the »uSB« interface of the
television and the corresponding socket on
the data device (external hard drive, digital
camera, card reader, memory stick or MP3
player) using a USB cable;
2 »Confirm the »
(green).
– T his display is only shown when connect-
ing the data medium for the first time.
– T he file browser appears.
« display with
«
Advertisement
Table of Contents
