Table of Contents
Advertisement
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Sound settings
1 Open the menu with »i«.
2 Select the menu item »SOUND SETTINGS«
with »
« or »
« and press »●« to confirm.
V
Λ
– T he »SOUND SETTINGS« menu appears.
Note:
Additional operations are explained in the
7
following sections.
SOUND SETTINGS
Volume
Balance
AVL
Sound Type
Sound Mode
Equalizer
External connections
Headphone
Audio Output Setup
Volume
1 Select the line »Volume« with »
and change the setting with »
Balance
1 Select the line »Balance« with »
and change the setting with »
*
U nder licence from SRS Labs, Inc. TruSurround XT,
SRS and the
symbol are trademarks of
SRS Labs, Inc.
20.09.2010
15:46
10
Off
Stereo
Normal
20
End
Back
« or »
V
<
>
« or »
«.
« or »
V
<
>
« or »
«.
Automatic volume
Television stations broadcast at different vol-
umes. The automatic volume limiting (AVL) func-
tion means the volume is kept the same when
you switch between channels.
1 Select the line »AVL« with »
select the option »On« with »
Note:
If the »SRS« setting has been selected in the
7
»Audio Mode« line, the AVL line cannot be
selected.
Stereo/two channel sound, mono
If the device receives two-channel-sound pro-
grammes, e.g. a film with the original soundtrack
on audio channel B (display: »Dual II«) and
the dubbed version on sound channel A (dis-
play: »Dual I«), you can select the audio channel
you prefer.
If the device receives stereo or Nicam pro-
grammes, it switches automatically to stereo
sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo
sound quality is poor.
1 Select the line »Audio Type« with »
»
« and adjust the setting with »
Λ
Stereo width
This broadens the sound output for stereo pro-
«
Λ
grammes and improves the sound with mono
reception.
1 Select the line »Audio Mode« with »
or »
«.
Λ
«
Λ
2 Select the option »Spatial« with »
SRS TruSurround xT*
SRS TruSurround XT is a patented audio tech-
nology which is integrated into the television set
and only requires the built-in speakers to gener-
ate a Surround Sound effect.
1 Select the line »Audio Mode« with »
or »
«.
Λ
2 Select the option »SRS« with »
« or »
« and
V
Λ
<
>
« or »
«.
« or
V
<
>
« or »
«.
«
V
<
>
« or »
«.
«
V
<
>
« or »
«.
19
ENGLISH
Advertisement
Table of Contents
