Table of Contents
Advertisement
CONNECTED TV AND HOmE NETwORK
It is recommended to switch off the equip-
7
ment that are not in use in home network in
order to avoid unnecessary network traffic.
Placing the modem or wireless network shar-
7
er on an elevated location will increase the
wireless connection reception strength.
Wireless connection reception strength may
7
vary depending on the type of the modem,
the distance between the modem and televi-
sion and the distance between the device
used as a DMS for DLNA application and
the modem.
Modem must be transmitting its SSID in order
7
to establish a wireless connection. Television
can not connect to a network without SSID.
When a network connection is established
7
with the wireless USB network, the con-
nection may be weak depending on the
strength of the wireless network in the area.
Extending the wireless USB device to a po-
sition that can see the modem with a USB
extension cable will increase the wireless
network performance.
Initial setup
1 Switch on the television set from standby with
»
8
«, »1...0« or »p+« or »p-«.
2 Open the menu with »i«.
3 Select the menu item »CONNECTED TV«
with »
« or »
« and press »●« to confirm.
V
Λ
– T he line »Open Connected TV« appears.
4 Confirm the option »Open Connected TV«
with »●«.
– T he »Language« menu appears.
5 Select the menu language with »
and press »●« to confirm.
– T he »Country« menu appears.
6 Select the country with »
press »●« to confirm.
– T he Info menu appears.
7 Confirm the initial network setup configura-
tion with »●«.
– T he »Settings« menu appears.
« or »
«
V
Λ
« or »
« and
V
Λ
wireless network settings
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. A Television con-
nected to the same network with a Modem or
IP sharer that support DHCP obtains the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
1 Select the line »Network« with »
and press »●« to confirm.
– T he »Settings > Network« menu appears.
Settings > Network
Wired
Wireless
Connection test
2 Select the line »Wireless« with »
and press »●« to confirm.
– T he message »Scanning...« is displayed
and the wireless networks that are found
appears.
3 Select the network you want to connect with
»
« or »
« and press »●« to confirm.
V
Λ
– W ireless connection password menu is dis-
played.
4 Select the first required character with »
<
>
»
«, »
« and »
« and press »●« to confirm.
Λ
Repeat the procedure for all characters.
Notes:
Select the push button »A,a« for upper
7
case/lower case and press »●« to confirm.
For canceling a character, select the push
7
button »
f
« and press »●« to confirm.
5 For entering the password, select the push
button »OK« with »
and press »●« to confirm.
------------------------------
« or »
V
Λ
Access Point
guest - Secured (WPA)
guest - On
« or »
V
Λ
V
<
«, »
«, »
« and »
V
Λ
ENGLISH
«
«
«,
>
«
29
Advertisement
Table of Contents
