Sound Settings - Grundig 49 VLE 7630 BP User Instructions

PICTURE­/SOUND­SETTINGS
Sound­settings­
1­
Open the menu with »MENU«.
2­ Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3­
Select menu item »Sound« with »
and press » « to confirm.
V
– »Sound« menu is active.
Settings > Sound
Picture Sound Source
Sound Mode
Night Mode
Bluetooth
Select Bluetooth Device
Advanced
Restore Default Sound Settings
Change Area
Note:
Additional operations are explained in the
7
following sections.
Sound­Mode
1­ Select the line »Sound Mode« with »
» «.
Λ
< >
2­
Press » « or » « to select the desired op-
tion.
DTS­TruSurround
DTS TruSurround is a patented audio technolo-
gy which is integrated into the television set and
only requires the built-in speakers to generate a
Surround Sound effect.
1­
Select the line »Sound Mode« with »
» «.
Λ
2­ Select the option »Movie«, »Natural«,
»Speech« or »Music« with »
«, »
V Λ
< >
« or »
Tuesday
xx xxx xxxx
TV Network Timer Parental
User
Off
Off
- - - -
Back Exit
BACK EXIT
« or
V
« or
V
< >
« or » «.
­ - ----------------------------------------------------------
Switching­bluetooth­on­/­off­and­regis-
tering­an­external­BT­device
Bluetooth enables the television's audio signal
«,
wireless to be sent to a registered BT device
(e.g. subwoofer).
«
The signal transmission is possible from the tele-
vision set to a Bluetooth-enabled device, only.
1­
Switch on the appropriate subwoofer and
start the registration on the subwoofer (see
subwoofer operating manual).
2­
Select the line »Bluetooth« with »
» « and switch on with »
Λ
– T he subwoofer is being searched for. After
a short time the subwoofer is displayed in
the menu.
3­ When the subwoofer has been found con-
firm with »OK« .
– T he name of the subwoofer is displayed in
the »Sound« menu.
Note:
To log out the subwoofer, select the
7
»Bluetooth device« item with »
and press »OK« to confirm. Log out the
subwoofer with »
4­
End settings with »EXIT«.
Location­selection
The function how to place the television set is
important for the automatic audio settings.
1­ Select the line »Advanced« from the Sound
menu with »
confirm.
2­
Select the line »TV Location« with »
» «.
Λ
3­ Select the required option »Stand« or »Wall-
mounted« with »
For DTS patents, see http://patents.dts.com. Manufac-
tured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are reg-
istered trademarks and DTS
mark of DTS, Inc.
For DTS patents, see http://patents.dts.com. Manu-
factured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0+Digital Out is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
<
« or »
V
« (red).

« or » « and press »OK« to
V Λ
< >
« or » «.
TruSurround
DTS, Inc. All Rights Reserved.
©
ENGLISH
« or
V
>
« (»On«).
« or » «
Λ
« or
V
is a trade-
29­