Scanning Programmes; Manual Reverse; Programme Sensor - Alpine TDM-7590R Owner's Manual

Scanning Programmes

1
Press the SCAN button to play the first 10
seconds of each programme on the tape.
"SCAN" appears on the display.
Press the SCAN button to cancel the scanning
when the desired programme is found.
NOTE
The SCAN operation cannot detect blank sections of
less than 4 seconds.

Manual Reverse

1
Press the PROG button during tape play to
change the tape direction to play the other side
of the tape.
The tape side indicators (
show which side of the cassette is being played.
Programme Sensor (P.S.)
1
Press the P.S. DN button once during tape play
to return to the beginning of the current selection
being played.
If you wish to return to a selection further back,
press repeatedly until the number of selections
you would like to skip is shown in the display.
The display will show PS-1 with the first press
and will increase by one with each successive
press up to PS-9. The tape indicator will blink
showing the direction of your search.
Press the P.S. UP button once during tape play
to advance to the beginning of the next selection.
If you wish to advance to a selection further
ahead, press repeatedly until the number of
selections you would like to skip is shown in the
display.
The display will show PS+1 with the first press
and will increase with each successive press up
to PS+9. The tape indicator will blink showing the
direction of your search during searching
operation.
NOTES
• The programme sensor feature is functional in the
tape play mode only.
• You can advance to the 9th (max.) programme or
return to the 8th (max.) programme.
and ) change to
Cassette
FR
ES
DE
IT
SE
15
-EN