Advertisement
Heading
Operating your coffee grinder (continued)
8.Select the grind by turning the grind
adjustment collar to the desired setting,
see figure 4.
Figure 4
Refer to the grind setting table on page 6 to
assist you in selecting the correct grind level
for the desired brewing method.
9.Position the group handle into the group
handle locator, see figure 5.
Figure 5
Note: There are two group handle locators
provided a smaller size to fit domestic
handles and a larger size for commercial
handles.
10. To grind coffee, press the group handle
against the button located in the centre
of the group handle locator, see figure 6.
11. When the basket is full, pull the group
handle off the button. Collapse the coffee
in the basket by tapping it on the bench
and repeat until the desired amount of
coffee has been ground.
Note: Foreign objects like stones or twigs
can sometimes be found in whole bean
coffee and can cause the coffee grinder to
jam. Should this occur refer to the Care and
Cleaning section on page 7 as these objects
need to be removed immediately.
Figure 6
5
Hide quick links:
Advertisement
