Contents Sunbeam’s Safety Precautions Congratulations Features of your Cafe Series Precision Grinder ® Functions of your Cafe Series Precision Grinder 6 ® Operating your Cafe Series Precision Grinder ® Adjusting the Grind Setting Care and Cleaning Advanced Settings for Recalibration Important instructions –...
• Never leave an appliance unattended while in use. If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line on 1300 881 861. Ensure the above safety precautions are understood.
Inspired by heavy-duty equipment found in The Sunbeam Cafe Series Precision Grinder ® restaurants, cafes and bars, the Sunbeam is constructed with quality die-cast metal Cafe Series is built to last. It brings together components and includes many features that ®...
Features of your Cafe Series ® Precision Grinder 450g Bean hopper The 450g capacity bean hopper has a closure arm for easy removal. This allows the user to remove the hopper without taking out the beans. Grind adjustment collar Large and easy to use, the collar has a range of 30 grind settings.
Page 7
Burr shield Conical burrs The hardened steel conical burrs achieve excellent grind consistency and minimises heat transfer to the coffee due to their slow rotation. Hopper closure arm Stainless steel housing Built to last, the heavy-duty Stainless Steel body encases a powerful belt driven motor and provides a stable base foundation for the grinder.
Functions of your Cafe Series Precision Grinder (continued) ® LED Lit Grind Area Seamless grind delivery is assisted by LED illumination that engages when grinding begins. An auto dimming feature then dims the light when grinding is complete. Easy clean without recalibration The patent pending grind cartridge enables easy access to the lower burr chamber without altering your grind settings.
Operating your Cafe Series ® Precision Grinder 5.Ensure operation dial is off, plug the power Before using the coffee grinder, wipe the base exterior with a damp cloth. Wash the cord into a 230-240V AC power outlet and switch the power on. bean hopper and hopper lid in warm soapy water, then rinse and dry thoroughly.
Page 10
Operating your Cafe Series Precision Grinder (continued) ® For grinding into the group handle Note: With the dial at ‘Auto’ you have the option to leave the group handle in the group 7.Insert the group handle into the group handle cradle without grinding coffee. handle cradle at an inclined angle placing the front edge under the lip of the group handle cradle.
Page 11
Operating your Cafe Series Precision Grinder (continued) ® For hands free grinding 10. Insert the group handle into the group handle cradle at an inclined angle placing the front edge under the lip of the group handle cradle. See figure 3. 11.
Adjusting the Grind Setting Grind setting table 2.Coffee that is ground too fine for a particular brewing process will result in SETTING BREWING METHOD over-extraction and the coffee will taste 0 - 7 Turkish bitter. On the other hand, coffee that is too coarse for a particular brewing method will 7 - 15 Espresso for Cafe Series...
Care and Cleaning Important Notes: Cleaning the burrs • Spots and marks on the surface of the If the coffee grinder is used frequently (every burrs are part of the hardening process. day), the burrs need to be cleaned every These marks do not affect the performance three weeks to ensure best performance of of the grinder or the taste of the coffee.
Page 14
Care and Cleaning (continued) 5.Lift the grind cartridge away from the grinder base, see figure 10. Figure 10 6.Clean the grind cartridge and bottom burr using the burr cleaning brush (located under the grind spill tray), see figure 11. Figure 11 7.Once both burrs are cleaned, return the grind cartridge to the grinder base so that the arrow on the side of the grind cartridge...
Page 15
Advanced Settings Recalibration of the EM0700 Note: Recalibration will change all previous settings on the grinder 1. Close hopper closure arm. 2. Purge beans through the grinder. 3. Turn the operation dial to the ‘off’ position. 4. Disconnect the plug from the power socket.
Page 17
® if it is faulty or defective, the motor will be (EM0700) is covered for the first year does not amount to a major failure. replaced free of charge. against faulty material or manufacture...
Page 18
12 Month Warranty This Sunbeam product is covered by a 12 month replacement or repair warranty, which is in addition to your rights under the Australian Consumer Law (if your product was purchased in Australia) or New Zealand Consumer Guarantees Act (if your product was purchased in New Zealand).