Sunbeam EM0480 Recalibration Manual

Hide thumbs Also See for EM0480:

Download this manual

Product Improvement Centre

EM0480 Recalibration Guide

Step 1

Ensure the coffee grinder is switched off and

unplugged from the power outlet. Remove the

bean hopper from the motor base, push down

and turn anti-clockwise, see figure 1.

Figure 1

Step 2

To remove the top burr turn the grind

adjustment collar in an anti-clockwise

direction until it stops, see figure 2.

Note: The top burr can only be removed

when graphic arrow on the grind adjustment

collar is aligned with the arrow on the motor

base.

Figure 2

Step 3

Press and hold down the "UNLOCK" button at

the rear of the motor base and with the other

hand turn the grind adjustment collar anti-

clockwise until the graphic arrow on the collar is

aligned with the arrow on the motor base, see

figure 3.

Figure 3

Page 1 of 3

Page 1 Product Improvement Centre EM0480 Recalibration Guide Step 1 Ensure the coffee grinder is switched off and unplugged from the power outlet. Remove the bean hopper from the motor base, push down and turn anti-clockwise, see figure 1. Figure 1 Step 2...
Page 2 Product Improvement Centre EM0480 Recalibration Guide Step 4 Lift out the top burr from the grind adjustment collar using the handle, see figure 4. Figure 4 Step 5 Lift the grind adjustment collar away from the motor base. Figure 5...
Page 3 Product Improvement Centre EM0480 Recalibration Guide Step 7 Remove the star washer, burr blade and the lower burr. Step 8 Add a spacer to make the grind finer or remove a spacer to make the grind coarser. Note: One spacer is...