Download Print this page

Sunbeam FA7200 Instruction Booklet page 13

Sunbeam 90cm remote controlled tower fan

Advertisement

Using Your Tower Fan (continued)
Nature mode
Nature mode provides an extra level of
comfort by simulating the natural rise and fall
of the wind over time. You can use this mode
on any fan speed setting.
To use Nature mode:
1.
Choose a fan speed.
2.
Press the
button on either the tower or
the remote until the
The fan will now vary its speed every few
seconds between the chosen fan speed, each
lower fan speed, and off. For example, if you
set the fan speed to 2 (medium), the actual
fan speed will alternate between 2, 1 and off.
To cancel Nature mode, Press the
on either the tower or the remote until the
light is no longer illuminated.
light illuminates.
button
Sleep mode
Sleep mode is identical to Nature mode with
the added advantage that the highest fan
speed gradually decreases over time. This
allows you to turn the fan on a high speed
setting last thing at night, knowing that by
the time you are asleep, the fan has switched
itself down to a slower speed.
To use Sleep mode:
1.
Choose a fan speed.
2.
Press the
button on either the tower or
the remote until the
The fan will now operate in the same manner
as with Nature mode, except that after 30
minutes, the maximum speed will decrease.
Eventually in this mode, the fan switches
down to 1 (low) speed, which alternates
between 1 and off.
To cancel Sleep mode, Press the
on either the tower or the remote until the
light is no longer illuminated.
light illuminates.
button
11

Hide quick links:

Advertisement

loading