Miele KM 6316 Operating And Installation Manual page 51

Problem
The ß symbol flashes
alternately with the
power setting
selected in one of the
cooking zones.
After the hob is
switched on "LC"
appears in the timer
display for a few
seconds.
After the hob is
switched on "dE"
appears in the timer
display for a few
seconds.
The cooking zones
do not heat up.
A cooking zone or the
whole hob switches
off automatically.
The Booster has
deactivated early
automatically.
The cooking zone is
not working in the
usual way at the
power level set.
Possible cause
There is no pan on the
cooking zone, or the pan is
unsuitable.
The system lock is activated.
The appliance is in
demonstration mode.
A cooking zone has been in
use for too long.
The overheating protection
mechanism has triggered.
The overheating protection
mechanism has triggered.
Problem solving guide
Remedy
Use a suitable pan (see
"Pans").
Deactivate the system
lock (see "Safety lock /
System lock").
Deactivate
demonstration mode
(see "Programming").
You can use the
cooking zone again by
switching it back on
(see "Safety switch-off").
See "Overheating
protection".
See "Overheating
protection".
51