Switching On - Miele KM 6316 Operating And Installation Manual

Operation

Switching on

To switch the hob on
Switching on a cooking zone, setting a power level
Altering the power level
24
The hob must be switched on before any of the zones can be
used.
Do not leave the appliance unattended whilst it is being
used.
^ Touch the s sensor.
0 will appear in each of the cooking zone displays. If no
further entry is made, the hob will switch itself off after a few
seconds for safety reasons.
^ Touch the sensor for selecting the cooking zone you want.
A 0 will flash in the cooking zone display.
^ Set the power level you want by touching the relevant
number on the numerical keypad.
To set one of the intermediate settings you need to touch
the area between the numbers (see "Power level range").
The power level selected flashes in the display for a few
seconds to start with and then lights up constantly.
^ Touch the sensor for selecting the cooking zone you want.
The power level will flash in the cooking zone display.
^ Set the power level you want by touching the relevant
number on the numerical keypad.
If only one of the cooking zones is in operation, you can
alter the power level without activating the cooking zone.