Table of Contents
Advertisement
Chapter 4: Web-Based Management
1. Click the hyperlink "VLAN" \ "Static VLAN" to enter the VLAN configuration
interface.
2. Select "802.1Q" in the VLAN Operation Mode, to enable the 802.1Q VLAN
function.
3. Click Add to create a new VLAN group or Edit to management exist VLAN groups.
Then the VLAN Group column appears.
4. Input a VLAN group ID and available range is 2-4094.
Figure 4-28: VLAN Group Configuration interface
5. Select specific port as member port. The screen in Figure 4-29 appears.
62
GE-DS-242-PoE Managed Ethernet Switch User Manual
Advertisement
Table of Contents
