Table of Contents
Advertisement
After enabling the IEEE 802.1X function, you can configure the parameters of this
function.
Figure 4-66: 802.1x System Configuration interface
This page includes the following fields:
OBJECT
IEEE 802.1x Protocol:
Radius Server IP:
Server Port:
Accounting Port:
Shared Key:
NAS, Identifier:
IEEE 802.1x Protocol:
4.12.3 802.1x Port Configuration
In this page, you can select the specific port and configure the authorization state.
The state provides No Authorization, Force Authorized, Force unauthorized, and
Authorize.
GE-DS-242-PoE Managed Ethernet Switch User Manual
DESCRIPTION
Enable or disable 802.1x protocol.
Assign the RADIUS Server IP address.
Set the UDP destination port for authentication requests to the
specified RADIUS Server.
Set the UDP destination port for accounting requests to the specified
RADIUS Server.
Set an encryption key for using during authentication sessions with the
specified RADIUS server. This key must match the encryption key used
on the RADIUS Server.
Set the identifier for the RADIUS client.
Enable or disable 802.1x protocol.
Chapter 4: Web-Based Management
113
Advertisement
Table of Contents
