Stp/Rstp Commands - GE -DS-242-POE User Manual

Chapter 6: Command Line Interface

STP/RSTP Commands

[no] spanning-tree
Description:
Enable or disable spanning-tree.
spanning-tree forward-delay
Description:
Set spanning tree forward delay used, in seconds.
Syntax:
spanning-tree forward-delay <4-30>
Parameters:
<4-30> specifies the forward delay, in seconds. Default value is 15.
NOTE: The parameters must enforce the following relationships:
2*(hello-time + 1) <= maximum-age <= 2*(forward-delay - 1).
spanning-tree hello-time
Description:
Set spanning tree hello time, in seconds.
Syntax:
spanning-tree hello-time <1-10>
Parameters:
<1-10> specifies the hello time, in seconds. Default value is 2.
NOTE: The parameters must enforce the following relationships:
2*(hello-time + 1) <= maximum-age <= 2*(forward-delay - 1).
162 GE-DS-242-PoE Managed Ethernet Switch User Manual