GE -DS-242-POE User Manual page 192

Chapter 6: Command Line Interface
Configure PoE -- Port
poe enable
Description:
Enabling or disabling the port POE injects function.
Command Level:
Global Configuration
Syntax:
poe enable [<port-list>]
[no] poe enable [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
Switch(config)# poe enable 1
Switch(config)# show poe status 1
Port Admin
Port1 Enable
Switch(config)# no poe enable 1
Switch(config)# show poe status 1
Port Admin
Port1 Disable
188
Oper Priority Power Limit[W]
on High 15.4
Oper Priority Power Limit[W]
off High 15.4
Current
Consumption [W]
13.4
Current
Consumption [W]
--
GE-DS-242-PoE Managed Ethernet Switch User Manual
Device
Current[mA]
Class
279 0
Device
Current[mA]
Class
-- 0