Commands Level - GE -DS-242-POE User Manual

Commands Level

The following table lists the CLI commands and descriptions.
Modes Access Method
Begin a session
User EXEC
with your switch.
Enter the enable
Privileged EXEC command while in
User EXEC mode.
Enter the
configure
Global
command while in
Configuration
privileged EXEC
mode.
GE-DS-242-PoE Managed Ethernet Switch User Manual
Prompt Exit Method
switch> Enter logout or quit.
Enter disable to
switch#
exit.
To exit to privileged
switch
EXEC mode, enter
(config)#
exit or end
Chapter 5: Console Management
About This Model
The user commands
available at the user
level are a subset of
those available at the
privileged level.
Use this mode to:
• Perform basic tests.
• Display system
information.
The privileged command
is the advanced mode.
Use this mode to
• Display advanced
function status
• Save configuration
Use this mode to
configure those
parameters that are
going to be applied to
your switch.
125