Enable Static Routing Check/uncheck the box to enable/disable
Destination LAN IP
Subnet Mask
Default Gateway
Hop Count
Interface
Add
Clear
III‐3‐8‐2. Port Forwarding
This function allows you to redirect a single port or consecutive ports of an
Internet IP address to the same port of a local IP address. The port number(s)
of the Internet IP address and local IP address must be the same.
If the port number of the Internet IP address and local IP address is different,
please use the "Virtual Server" function instead.
static routing.
Enter the destination network's IP address.
Enter the subnet mask of the destination
network.
Enter the default gateway of the destination
network.
Enter the hop count (the distance between
destination network and this broadband
router) here.
Enter the interface which leads to
destination network.
Add the route to the current static routing
table.
Clear all fields.
74