Installation Instructions For Amd Am2 / K8 Cooler & Clip - Gigabyte GH-PCU23-VE Installation Manual

Installation Instructions for AMD AM2 / K8 Cooler & Clip
Figure 1-1 Figure 1-2
Figure 2-1 Figure 2-2
Figure 3-1 Figure 3-2
Please refer to page 13 & 14 for power connection and
installation of the fan speed controller.
GH-PCU23-VE
Figure 1.
Apply a thin layer of heat sink paste to the surface
of the CPU
the cooler as shown in Figure 1-2. Put the cooler
Figure 1-3
onto the CPU
Figure 2.
Align and secure one side of the clip
align the clip with the mounting lugs and then carefully push straight down
on the clip to hook it to the retention frame. For AM2 CPU, hook the clip to
the center mounting lug on the retention frame
Figure 3.
Close the clip lever as shown in Figure 3-1 and
Figure 3-2 to secure it to the retention frame.
Connect the fan cable connector of the cooler to
Figure 3-3
the motherboard CPU fan header. Then the
installation is now complete
- 12 -
. Put the AM2/K8 clip on to
(Figure 1-1)
.
(Figure 1-3)
. On the other side , also
(Figure 2-1)
.
(Figure 2-2)
(Figure 3-3)
.