Products with a warranty sticker that is removed, torn or unreadable Due to the weight of the cooler exceeding normal standards, please remove the cooler before computer transport to prevent damage to the cooler itself as well as prevent problems during installtion. - 5 - GH-PDU21-SC...
Installation Instructions for P4 LGA775RM & Cooler To install GH-PDU21-SC on LGA775 motherboard needs both LGA775 RM & P4 clips. Side A Please add an adequate layer of heat sink Side B paste on the surface of the CPU. Figure 1 Place the LGA775RM onto the LGA775 motherboard so that side A is parallel with ARM and side B is parallel with CAM.
Figure 4 Connect the 3-pin connector to the CPU fan connector on the motherboard. Clips Installation is now complete. Figure 4 If fan speed control is required, please refer to "Installation of the Fan Speed Control Cable". - 7 - GH-PDU21-SC...
CPU. Connect the 3-pin connector to the CPU fan connector on the motherboard. Clip Installation is now complete. If fan speed control is required, please refer to "Installation of Figure 4-1 Figure 4-2 the Fan Speed Control Cable". - 8 - GH-PDU21-SC...
Figure 4 Connect the 3-pin connector to the CPU fan connector on the motherboard. Clip Installation is now complete. If fan speed control is required, please refer to "Installation Figure 4 of the Fan Speed Control Cable". - 9 - GH-PDU21-SC...
Figure 2 Figure 3 Connect the other side of the cable to the CPU fan connector located on the motherboard. The original fan speed of 2,000 Figure 3 rpm will then drop down to 1,700 rpm. - 10 - GH-PDU21-SC...
Need help?
Do you have a question about the GH-PDU21-SC and is the answer not in the manual?
Questions and answers