Installation Instructions for Intel
Figure 1-1
Figure 1-2
Figure 2-1
Figure 2-2
Figure 3-1
Figure 3-2
Please refer to page 13 & 14 for power connection and installation of the fan speed controller.
Pentium
4 mPGA478 Cooler & Clips
®
®
Figure 1.
Apply a thin layer of heat sink paste to the surface of the CPU
and then place the cooler atop the CPU
1-1)
Figure 2.
Hook one end of the clip to one of the RM hooks
other end to the hook on the other side by pushing down on the handle
. Do the same for the other clip.
(Figure 2-2)
Figure 3.
Connect the 3-pin fan cable connector of the cooler to the motherboard
CPU fan header
(Figure 3-1)
.
(Figure 3-2)
- 11 -
(Figure 1-2)
(Figure 2-1)
. Then the installation is now complete
(Figure
.
. Secure the
GH-PCU23-VE