Set Supervisor Password - Gigabyte GA-5EXSH-RH User Manual

GA-5EXSH-RH Motherboard

Set Supervisor Password

You can install and change this options for the setup menus. Type the password up to 6
characters in lengh and press <Enter>. The password typed now will clear any previously
entered password from the CMOS memory. You will be asked to confirm the entered
password. Type the password again and press <Enter>. You may also press <Esc> to abort
the selection and not enter a specified password or press <Enter> key to disable this option.
Password on boot
Password entering will be required when system on boot.
Enabled
Disabled
Requries entering password when system on boot.
Disable this function. (Default setting)
4 8