Table of Contents
Advertisement
EPP
ECP
Base I/O Address
378
278
Iterrupt
IRQ5
IRQ7
PS/2 Mouse
Set this option 'Enabled' to allow BIOS support for a PS/2 - type mouse.
Enabled
Disabled
USB Controller
This item allows users to enable or disable the USB device by setting item to the desired
value.
Enabled
Disabled
USB 2.0 Controller
This item allows users to enable or disable the USB 2.0 device by setting item to the desired
value.
Enabled
Disabled
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Set IO address to 378
Set IO address to 278.
Set Interrupt as IRQ5. (Default setting)
Set Interrupt as IRQ7. (Default setting)
'Enabled' forces the PS/2 mouse port to be enabled regardless if
a mouse is present. (Default setting)
'Disabled' prevents any installed PS/2 mouse from functioning,
but frees up IRQ12.
Enable USB controller. (Default setting)
Disbale this function.
Enable USB 2.0 controller.
Disbale this function. (Default setting)
3 9
BIOS Setup
Advertisement
Table of Contents
