Specification; Hardware - Gigabyte 686LX User Manual

2.

SPECIFICATION

2.1. HARDWARE

CPU
PROTECTION
SPEED
DRAM MEMORY
CACHE MEMORY
I/O BUS SLOTS
IDE PORTS
Pentium II processor 233 – 633 MHz.
242 pins 66MHz slot1 on board.
Onboard Buzzer Alarm when detect "CPU FAN
Failure" or " CPU Overheat" .
Automatically slow down CPU speed when "CPU
FAN Failure" or "CPU Overheat".
Intel LDCM support.
H/W monitor power status ( 5V, 12V, CPU
voltage & CMOS battery voltage).
66 MHz system speed.
66 MHz AGP bus speed. (133MHz 2*mode)
33 MHz PCI-Bus speed.
8 MHz AT bus speed.
4 banks 168 pins DIMM module sockets on board.
Use 8 / 16 / 32 / 64 / 128 / 256 MB 60~70 ns DIMM
module DRAM.
8 ~ 1 GB DRAM size.
Support 3.3V SDRAM / EDO type DRAM.
Support ECC or Non-ECC type DRAM.
32 KB 1st cache memory included in CPU.
256KB/512 KB 2nd cache in CPU.
Support DIB speed mode for L2 Cache.
1 66MHz / 133MHz AGP bus.
4 33MHz Master / Slave PCI-BUS.
3 8MHz 16 bits ISA BUS.
2 Ultra DMA/33 Bus Master IDE channels on
board.(Using IRQ14,15)
Back ward Support Mode 3,4 IDE & ATAPI CD -
ROM.
2-1
Specification