Pairing The Dakota - Garmin DAKOTA 10 Owner's Manual

of time.
• Ambient Pressure—records
ambient pressure changes over a
period of time.
To manually calibrate the
altimeter:
1. Go to a location where you know
the elevation or the barometric
pressure.
2. Touch Setup >
To Begin Altimeter
3. Touch Yes if you know the
elevation, touch
know the barometric pressure.
4. Enter the elevation or barometric
pressure, and then touch

Pairing the Dakota

NoTe: Connecting to wireless
sensors is unavailable with the
Dakota 10.
The Dakota can be used with an
optional Garmin heart rate monitor
Dakota Series Owner's Manual
Altimeter > Press
Calibration.
No > Yes if you
.
Customizing the Dakota
to display your heart rate. It can also
be used with an optional Garmin
cadence bike sensor to display your
pedaling cadence. When connected
to the appropriate Garmin device, the
heart rate and bike cadence values
are listed as data-field options on the
Map page, the Compass page, and the
Trip Computer.
Pairing is connecting your Dakota
with wireless sensors, such as a heart
rate monitor or a cadence bike sensor.
After you pair the first time, your
Dakota automatically recognizes the
wireless sensor whenever they are
turned on and within range of each
other.
To pair the Dakota with a
wireless sensor:
1. Place the Dakota within 10 feet
(3 meters) of the wireless sensor
(heart rate monitor or speed/
cadence bike sensor).
29